Invisible Patterns - Home to 3M VentureShield paint protection film
More links

Bike Kits

Car Light Kits

How To Order Your Paint Protection Film ?
Use this link to get a free quote for your vehicle pattern.

Installation Tips
Work in a dust free environment, with no wind and out of direct sunlight.

Make sure the surface to be covered is both clean and dry.

Pre-mix the soap solution ahead of time.

Remember VentureShield™ is elastic and a very forgiving material - you can lift it and reposition it as needed, there is no reason to rush the installation.


These pictures show the damaged caused to a BMW that hit a garage wall at 8mph. Its paint was coated with VentureShield protective tape, keeping the scrape away from the body. When the tape was peeled off, the scratches disappeared, too.

 
Installation....

Installation steps for appling the VentureShield™ film patterns.

Before installing our patterns please consult our more detailed written instructions included with all our paint protection patterns.

Because of the large areas and curves on cars we advise you to get Full and Standard Kits fitted by us, this will also ensure you benefit from the lifetime warranty we provide with our patterns.

1. The first step is to spray the surface where the film is to be applied with a soapy solution.  
2.Remove the white backing from the film and spray the exposed adhesive with the soap solution.  
3. The film should then be positioned in place on the vehicle and another coating of soapy solution should be sprayed on the top surface of the film.  
4. The next step is to pick a starting position, peel that corner up and then spray a plain water solution under the film,  
5. Then squeegee the film down at that start point to tack the pattern down in place.  
6. Now spray the outside of the film with the soapy solution again, and start to squeegee from the start position outwards towards the edges, stretching the film with the palm of the hand as necessary to fit the area.  

7. The final step is to seal and dry the edges using your squeegee and a dry towel.

That's all there is to it.

  
 
Due to the tremendous strength and UV resistance of VentureShield™, it comes with a Lifetime Warranty.
     
 
Invisible Patterns exclusively uses Venture Tape Film 'VentureShield'
VentureShield film now a part ot the 3M brand. 3M paint protection film
Invisible Patterns are a VentureShield certified and qualified installer of paint protection film

The ultimate clear paint protection film for your
vehicle. Strong, clear
bodywork protection system
to cover all the important areas of your vehicle.


VentureShield™ is a clear, thermoplastic urethane film made from 100% aliphatic resin. Its ability to resist yellowing, and offer the
highest level of abrasion resistance is unparalleled
in the industry.

It's like like leaving the showroom everyday...

We can arrange with your dealer to have your brand new vehicle delivered straight to our garage for pattern fitting to avoid any possible scratches you may get before you've even made it home.
contact us for more details
© 2009 INVISIBLE PATTERNS. ALL RIGHTS RESERVED
Our Policies

VentureShield™ is a regd. Trademark of Venture Tape Corp
Web site design by PT-Designs

send us an email